Configuring Pppoe Settings; Configuring Ddns Settings - Honeywell equIP Series User Manual

2MP/4MP Low Light WDR IP Camera User Guide
Note RTSP Over TLS is effective only for TCP protocol.
You can enable or disable RTSP Over TLS on the Setup  Network Setup  Connection 
RTSP page.
RTSP Over TLS is disabled by default. To enable it, click ON, and then click Save.

Configuring PPPoE Settings

You can configure Point-to-Point Protocol over Ethernet (PPPoE) settings on the Setup >
Network Setup > PPPoE page.
To enable PPPoE:
Select the Enable check box.
1.
In the User Name and Password fields, enter the user name and password that you
2.
received from your Internet service provider (ISP).
Click Save to apply the settings. The camera will connect to the Internet via PPPoE after
3.
rebooting.

Configuring DDNS Settings

You can configure Dynamic DNS (DDNS) settings on the Setup  Network Setup  DDNS
page.
30