Fitting And Wiring; Mechanical Installation; Dimensions; Fig. 3 Dimensions - Beckhoff BC9000 Documentation

3

Fitting and wiring

3.1

Mechanical installation

3.1.1

Dimensions

The system of the Beckhoff Bus Terminals is characterized by low physical volume and high modularity.
When planning a project it must be assumed that at least one Bus Coupler and a number of Bus Terminals
will be used. The mechanical dimensions of the Bus Couplers are independent of the fieldbus system.
Fig. 3: Dimensions
The total width in practical cases is composed of the width of the Bus Coupler, the KL9010 Bus End
Terminal and the width of the bus terminals in use. Depending on function, the Bus Terminals are 12 mm or
24 mm wide. The front wiring increases the total height of 68 mm by about 5 mm to 10 mm, depending on
the wire thickness.
BC9000 and BC9100 Version: 4.0.0
Fitting and wiring
13