Advertisement
Quick Links
Advertisement
Related Manuals for Beckhoff BK7300
Summary of Contents for Beckhoff BK7300
- Page 1 & User Manual Beckhoff 7300 V 0.1...
- Page 2 ® ® Last update: July 2012 All software-related descriptions refer to the software V1279. We recommend to update older versions of the system. Small deviations in the description because of software changes are possible. All listed brands and logos are registered trademarks of their respective owners. Copyright All rights reserved.
- Page 3 Table of Content 1. Electrical outlet ............. 4 2.
- Page 4 Compatible terminals: KL9010 KL2809 DO KL1809 DI Warning!! The Beckhoff coupler only works if it is KL4438 AO the only one on the interface, i.e. no other IO sta- KL9188 24V Terminal tions may be operated on the same interface as KL9189 0V Terminal well as only one Beckhoff coupler via bus.
- Page 5 Connection to the myGEKKO The Beckhoff coupler is connected to a RS485 Connection via Interface interface. It can be connected either directly to the RS485 interface on the myGEKKO Touch or via COM 2 a RS232/RS485 interface converter. This interface...
- Page 6 2. Hardware configuration The modules are parameterised using the rotary switch of the BK7300. Therefore, only the end termi- nal must be plugged. To establish the communication with the myGEKKO you need to set the baud rate to 38400 and watchdog to 0 ms.
- Page 7 Parameterisation table for further settings of the modules 3. Software activation on the myGEKKO After connecting the Beckhoff modules you can start with the configuration. Log in as configurator. Change to the system menu -> IO configuration Select the first free IO station and set Modbus. (The address of the coupler and the number of the IO station must match) Select the interface.
- Page 8 www.my-gekko.com A first class product of Europe! The result of a close collaboration between Italy, Switzerland and Germany...