Headlands - Hardi HC 8500 Operator's Manual

5 - Operation

Headlands

Press the Headlands button on the Field tab to access the Headland Options screen.
ATTENTION! A Field Boundary is required to create a headland.
Enable Headlands: Use check box to turn
Headlands functionality on and off.
Add Headland
Load a Headland
Edit Headland
Alarm Settings
Active Area
Work Area
Product will
be applied to
main section
of field.
AutoSwath
will turn off
product on
headlands.
Add a Headland
Press on Headlands Options screen.
Select Headland Type from drop-down box.
5.14
Enable Headlands
Active Area
All
Save
Headlands
Product will
be applied to
headlands of
field.
AutoSwath
will turn off
product on
main section
of field.
Field
Boundary
Headlands
Topography
Headland Options
All
AutoSwath
will not be
affected by
headlands.