Hardi HC 8500 Operator's Manual page 46

4 - System setup
12. Enter Distance from Antenna Height to
Ground:
A. Press
to type in value.
B. Press
to confirm selection.
13. Hitch Settings:
A. Press Hitch to view data already typed
in step 7.
B. Press
to confirm selection.
14. Check the data in the overview.
Press to confirm selection.
ATTENTION! If Offsets need to be corrected,
then press the button to change the
antenna settings for the Selected Vehicle in
the drop down menu, before confirming
selection.
4.20
Vehicle Offsets: JD 4630
Hitch
Antenna
Enter Distance from Vehicle References to the Antenna
Antenna Location from
Rear Axle
Antenna Location from
Centerline
Antenna Height from
Ground
Vehicle Offsets: JD 4630
Hitch
Antenna
Enter Distance from Rear Axle to the Following Locations
Rear Drawbar
Rear Lift Arms
Front Lift Arms
Operating Configuration Wizard: Vehicle
Select Vehicle
JD 4630
Offsets
Antenna Location from Rear Axle
Antenna Location from Centerline
Antenna Height from Ground
Rear Drawbar
Rear Lift Arms
Front Lift Arms
In Front
Left