Pattern Groups - Hardi HC 8500 Operator's Manual

4 - System setup
Edit Pattern
If you wish to rename a pattern, first press the Manage Patterns button on the Guidance Tab of the Mapping Toolbox. Press
to enter a name for the pattern. The new pattern name now appears in the pattern list of the Manage Patterns
screen.
Remove Pattern/Remove All Patterns
To remove a pattern from the display memory, first press the Manage Patterns button on the Guidance Tab of the Mapping
Toolbox. At the Manage Patterns screen, press either:
• Remove button if you wish to delete one pattern file; or
• Remove All button if you wish to delete all of them for the current field.
Reset Pattern
If you have been using an already-saved pattern, and wish to switch over to a different pattern in the same field, you can use
the Reset Pattern feature by following the steps below.
1. Press Reset
Press the Reset button on the Guidance screen.
2. Confirm Reset
The Guidance screen appears, asking you to reset the current guidance pattern. Press
3. Create new pattern (optional)
The pattern is now reset. You may now create a new pattern, if desired.

Pattern Groups

Pattern Groups allow the user to group up to 20 patterns per field, using the Group Manager.
The Group Manager allows the user to add a new
pattern or load an existing pattern to a Group.
Once a Group is created, it can be saved and
reloaded.
4.90
to continue.
Reset
Group Manager
Load
Nudge: 2.0
Total: 0.0