Table of Contents
Advertisement
Map Screen
Configuration Setup Screen
The Configuration Setup screen is where you can make settings adjustments for your equipment, ground speed, GPS, and
controllers.
The appearance of this Configuration Setup screen varies, based on your particular configuration. Most Configuration
Settings screens will include the following buttons.
• Vehicle Offsets. For more information, see "Vehicle Offsets" on page 4.72.
• Speed Input. For more information, see "Speed Input Settings" on page 4.70.
• Automatic Swath Control. For more information, see "Automatic Swath Control (AutoSectionControl)" on page 4.71.
• Swath Section Offsets. For more information, see "Swath Section Offsets" on page 4.73.
• Equipment Settings. Not relevant for HARDI® sprayers.
Mapping Toolbox
Legend Settings
On the Legend Select screen, press the Setup (wrench) button next to the Rate button, and the Legend Settings
screen appears. The Legend Settings screen allows you to change the default legend.
÷
NOTE!
• The Legend Settings screen can also
be accessed by pressing the Edit
Legend button on the Setup screen's
Product Tab.
• Legend settings changes that are
made at the Legend Settings screen
will affect all regions.
The Legend Settings screen includes the following
items:
• Attribute
Appears at the top left of the Legend Settings screen. Attributes shown for Harvest include Yield and
Moisture. The Rate attribute is shown for Planting and Application operations. You can adjust the
color scheme, spacing and ranges as they appear on the map screen, by using the buttons described
below.
• Average
The Average button changes the average rate for the legend. Press
shown on the map legend.
• Range Spacing
The Range Spacing button changes the difference between the rates in one color range. Press
legend range spacing value, which is the total number of units represented by a particular color.
Your Specific
Configuration
Configuration
Legend Settings
Attribute: Rate
Average
Range Spacing
Automatic
Legend
5 - Operation
Color Scheme
Green-Yellow-Red
Reset to Default
Legend
Range
Save as Product
Legend
Attribute: Yield
to specify the average of the ranges
to edit the
5.1
Advertisement
Table of Contents
