Table of Contents
Advertisement
4 - System setup
51. Automatic Swath Control options:
• Outside Boundary Option
Select one of the two options to determine
system behavior when a section exits a field
boundary.
• Coverage Option
In the Coverage Option area, you must
choose between three options:
• Minimize Skip
Turns off the implement section after
the entire section is fully inside your
coverage area.
This prevents the possibility of skips.
• Minimize Overlap
Turns off the implement section when
that section first enters your coverage
area.
This prevents the possibility of overlaps.
• User Defined
Allows you to choose what percentage of the implement section is within the coverage area before that section
turns off. For example, if you choose 50%, then the section will switch off when half of it is within your coverage
area.
• Press "Look Ahead Settings" to edit settings.
52. Look Ahead settings:
• Turn-On Look Ahead
Determines how far ahead the system looks
to turn the sections back on. This
compensates for delay in the system when
the sprayer sections are turned on.
• Turn-Off Look Ahead
Determines how far ahead the system looks
to turn the sections off. This compensates for
delay in the system when the sections are
turned off.
Press
to confirm.
53. When returned to Configuration Setup screen, then press
page 4.46.
4.32
Automatic Swath Control
Application
Outside Boundary Option
Coverage Option
Keep Unchanged
Minimize Skip
Turn Section Off
Minimize Overlap
User Defined
Look Ahead Settings
Hardi
Turn-On:
in order to continue with "Product setup" on
Look-Ahead
Settings
Turn-Off:
Advertisement
Table of Contents
