Table of Contents
Advertisement
33. Application Point Offset:
A. Press
to enter the distance
from the tractor hitch to the nozzles
on the sprayer.
B. Press
to confirm value.
ATTENTION! For offsets see "Sprayer Offsets"
on page 8.1.
34. Press
to confirm selection.
35. Additional devices:
A. Press "Norac UC5" button to enable
the use of
AutoTerrain/AutoHeight/AutoSlant.
B. Press
to continue.
ATTENTION! If the "Norac UC5" is not
enabled, the
AutoTerrain/AutoHeight/AutoSlant will not
be shown in the working screen.
Equipment Setup Wizard: Application Point Offset
Enter Distance from Hitch to Application Point
(front to back)
Implement Wizard: Application Channels
Type
Controller
Channel
Liquid
Hardi
Implement Wizard: Additional Devices
Norac UC5
OptRx Crop Sensor
Crop Sensor Settings
Sensing Width
Swath
Offsets
Note: Sensing Width should typically be set to the same
width as the implement.
4 - System setup
Container
Liquid
Application
Main Tank
Direct
Injection
Granular
Application
Remove
Number of Sensors
4.27
Advertisement
Table of Contents
