Table of Contents
Advertisement
External Drive
External Storage Operations
The External Storage Operations button is where you can copy your field data; upgrade display firmware; as well
as import, export and manage files.
÷
NOTE! The display can only read and write to USB drives format as FAT32.
Upgrade Firmware
Pressing the Upgrade Firmware button allows you to upgrade the display firmware from the .fw2 file stored on the USB drive.
At the File Selection screen, scroll through the list of files on the USB drive until you find the .fw2 firmware file. Highlight the
.fw2 file and the box at the upper right-hand side of the File Selection screen shows the version of this file.
Press
to continue, and the Upgrade screen informs you that the upgrade is beginning. At the Upgrade Ready
screen, press
.
±
WARNING! Do not disconnect display power when the upgrade is taking place.
Import Files
The File Selection screen opens. Use the scroll bar to find the file you wish to import. File formats that you can import:
.AGSETUP
Use to transfer setup information from display to display or from SMS and display
• Replaces MSF, IBY, PAT, IRX, REF
• Allows full synchronization of the following file formats:
• Management Data (Growers, Farms, Fields, Seasons, Operators)
• Products and Product Mixes
• Boundaries
• Guidance Patterns
• Marker Sets and Markers
÷
NOTE! Do not use the IBK to "clone" a display. Use AGSETUP.
.AGDATA
• Includes all the necessary data to fully archive in SMS
• Includes recorded operation data
• Equipment Used
• Products Used
• Marks Logged
• Boundaries
• Guidance Patterns
• Flexible export options
• Will be able to export by Grower
Upgrade
-
HC9500_package-6.0.19.0.fw2
Firmware
Import
Files
4 - System setup
4.107
Advertisement
Table of Contents
