Avaya IG550 Quick Start Manual page 14

3. Configure your laptop:
Turn on the power to the management device. Start your asynchronous
●
terminal emulation application (such as Microsoft Windows
Hyperterminal) and select the appropriate COM port to use (for
example, COM1).
Configure the port settings as follows:
●
- Bits per second: 9600
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow control: None
4. Log in to the router with the root login and password. If a password has
not been established, leave the password field blank.
5. At the root prompt (%), enter cli.
6. At the cli prompt (>), enter configure.
7. At the configure prompt (#), enter the following:
If a root password has not already been set, set system
●
root-authentication plain-text-password
password at the prompt, which you must enter twice.
● set system time-zone <time-zone>
where
<time-zone>
identified by continent and city. Use the ? option to see the list of time
zones.
● set system host-name
where <host-name> is the name of the Juniper Services Router to be
accessed on the LAN/WAN.
set interfaces ge-0/0/<#> unit 0 family inet address
●
<IP_address1>
where <#> is the Gigabit port number (0, 1, 2, or 3) you want,
IP_address1> is the address of the router, and /24 is the subnet
<
mask. The subnet mask may vary, depending on the customer's
configuration.
14 Quick Start for Hardware Installation: IG550 Integrated Gateway
is the name of the name of the time zone,
<host-name>
/24
a new
, and