14. Upgrade the JUNOS software on the router, if necessary. See Juniper
J-Series Services Router documentation.
15. Go to
Configuring the TGM550
Configuring the TGM550
1. Log in to the TGM550.
At the cli prompt (>), type ssh <login>@<ip_address>, where
●
<login> is root or another login, if previously administered, and
<ip_address> is the IP address of the TGM550, and press Enter.
The message, Are you sure you want to continue connecting?
appears.
Enter yes.
●
At the password prompt, type the password and press Enter. Get this
●
password from either your project manager or your services support
group.
You are now logged-in.
- If you are prompted to change the root password, change the
password to a password agreed upon with the customer
administrator.
2. Identify the TGM550 serial number.
At the TGM550 command line, type show system.
●
Note the serial number of the TGM550.
●
3. At the TGM550 command line, type show recovery and check the
transition points for the mgc list.
4. Ping the Communication Manager server.
At the TGM550 command line prompt, type ping <ip_address>,
●
where <ip_address> is the ip address of the server.
Verify that replies from the server scroll down the screen.
●
5. Update TGM550 firmware.
on page 17.
Issue 2 January 2008
17