Avaya IG550 Quick Start Manual page 15

Note:
The ge-0/0/0 port number is often reserved for services access.
Note:
● set interfaces vp-<slot_number>/0/0 unit 0 family
inet address <internal_ip_address>/32 destination
<tgm550_IP_address>,
where <internal_ip_address> is the address the TGM550 uses
to telnet to the router and <tgm550_IP_address> is the IP address
for accessing the TGM550.
set system name-server
●
where <IP_address> is the address of a DNS server on the LAN/
WAN. Repeat this command for any additional DNS servers the
TGM550 might access.
set system services ssh root-login allow
●
to allow access to the router with ssh. This command is optional, based
on customer requirements.
set system services telnet
●
to allow access to the router with telnet. This command is optional,
based on customer requirements.
set system domain-search
●
where <domain-name> is the name of the Juniper Services Router's
network or subnetwork. Repeat this command for any additional
domains the TGM550 might access.
set system domain-name
●
where <domain-name> is the name of the Juniper Services Router's
domain.
● set system ntp server
where <IP_address> is the address of an NTP server for time
synchronization.
set interface lo0 unit 0 family inet address
●
<IP_address>
where
<IP_address>
Router.
<IP_address>
<domain_name>
<domain_name>
<IP_address>
is the loopback address of the Juniper Services
Issue 2 January 2008 15