Avaya IG550 Quick Start Manual page 8

9. Connect power to the back of the router.
AC Power
●
a. Insert the appliance coupler end of a power cord into the appliance
inlet on the power supply faceplate.
b. For a 6350 only, repeat for the second power supply.
c. Insert the plug of each cord into an AC power source receptacle.
DC Power
●
a. Ensure that the voltage across the DC power source cable leads is
0 V and that there is no chance that the cable leads might become
active during installation.
b. Verify that a licensed electrician has attached the appropriate power
cable lugs to the ends of the negative and positive DC source power
cables. These are the lugs that you are attaching to the chassis DC
terminals.
J4350
8 Quick Start for Hardware Installation: IG550 Integrated Gateway
J6350
qsmagnd2 LAO 092906