Checklist For The Use Of U-Remote Safety Modules - Weidmuller UR20-4DI-4DO-PN-FSOE Manual

ANNEX

Checklist for the use of u-remote safety modules

Equipment type / equipment ID
Version: HW/FW
Reviewer 1:
Notes:
No. Requirement (mandatory)
1 The corresponding manuals were consulted during planning
("u-remote Manual " and "Modules for functional safety manual").
2 The sensors/control devices are approved for connection to the re-
spective module.
3 The power supply was planned as per the safety extra-low voltage
guidelines in accordance with PELV or SELV.
4 The module was externally fused according to the guidelines in the
"Modules for functional safety manual".
5 Measures to prevent simple manipulations have been planned.
6 Measures against plug mix-ups have been planned.
7 The requirements for the sensors and installation of cables cor-
respond to the applicable safety standards (SIL, Cat., PL) and the
planned implementation takes these standards into consideration.
8 The guidelines for per-channel configuration have been defined.
9 The intentional starting up of potentially hazardous processes is
only possible while looking into the danger zone at the same time.
10 If the installation requires exclusions of faults: the measures have
been realized.
11 The planned use corresponds to the intended use.
12 The environmental conditions meet the guidelines that are speci-
fied in the technical data.
Requirement (optional)
13 The accessories to be used were selected according to the order
data in the "Modules for functional safety manual".
14 The guidelines for installation and electrical set-up were defined
and handed over to the departments performing the work.
15 The guidelines for commissioning were defined and handed over to
the departments performing the work.
Date / Signature of Reviewer 1:
A-2
Date:
Reviewer 2:
u-remote IP20 modules for functional safety manual
yes Remark
yes/no Remark
Date / Signature of Reviewer 2:
Sheet 1/3: Planning
1484600000/04/06.2017