Planning Io-Link Device Configurations; U-Remote Io-Link Configurator; Installing The U-Remote Io-Link Configurator; Operating The U-Remote Io-Link Configurator - Weidmuller UR20-4COM-IO-LINK Manual

7 Planning IO-Link device configurations
7.1 u-remote IO-Link configurator
You can use the u-remote IO-Link configurator to configure
the IO-Link system. You can carry out the following functions
for test purposes, during commissioning or service work:
– Create and export IO-Link device configurations.
– Parameterise IO-Link devices during ongoing operation.
– Read out identification data, process data and diagnoses
of IO-Link devices.
You can download the software from the Weidmüller web-
site.
7.2 Installing the u-remote IO-Link configurator
Installing the installation version
The installation version links project files (".ucc") with the
u-remote IO-Link configurator. You can open project files by
double-clicking on the file.
▶ Download the u-remote IO-Link configurator from the
Weidmüller website.
▶ Navigate to the download folder.
▶ Double-click IOLink-Device-Configurator-Set-
up_1.2.0.exe.
▶ Follow the installation wizard.
Once successfully installed, you can start the IO-Link Config-
urator. The starting page is displayed.
Installing the portable version
You can use the portable version without install-
ing it. You can only open project files from the

u-remote IO-Link configurator.

▶ Download the u-remote IO-Link configurator from the
Weidmüller website.
▶ Navigate to the download folder.
▶ Double-click IOLink-Device-Configurator-Porta-
ble_1.2.0.exe.
The starting page is displayed.
The licence conditions are displayed when the
program is started for the first time.
▶ Read and confirm the licence conditions.
2547720000/03/09.2019
7 Planning IO-Link device configurations | u-remote IO-Link configurator
7.3 Operating the u-remote IO-Link configurator
Displaying the starting page
The starting page is displayed each time you start the u-re-
mote IO-Link Configurator. On the starting page you can con-
nect to the fieldbus coupler, create a new project or open an
existing project.
Calling up the starting page
▶ In the menu bar, click the house icon.
IO-Link port overview
1
2
3
4
5
6
7
IO-Link port overview (online mode)
1
Displaying the starting page
2 Selecting IO-Link master in the device tree
3
Opening the IODDfinder in the standard browser
4
Displaying diagnoses
5
Displaying IO-Link device parameters
6 Deleting IODD from IO-Link port
7
Adding IODD to IO-Link port
8
Changing the language
9
Separating the connection to the fieldbus coupler
10 Displaying the process data
11 Detecting the connected IO-Link device
12 Deactivating the IO-Link port
13 Activating an IO-Link port
14 Displaying the context menu
Manual Communication module UR20-4COM-IO-LINK
8
9
10
11
12
13
14
41