Digital Input Module Ur20-8Di-Pn-Fsps, Ur20-8Di-Pn-Fsps-V2 - Weidmuller UR20-4DI-4DO-PN-FSOE Manual

Remote i/o system u-remote; modules for functional safety
Table of Contents

Advertisement

5.6

Digital input module UR20-8DI-PN-FSPS, UR20-8DI-PN-FSPS-V2

Digital input module UR20-8DI-PN-FSPS (Best.-Nr. 1335070000), UR20-8DI-PN-FSPS-V2
(Best.-Nr. 2464590000)
The UR20-8DI-PN-FSPS or UR20-8DI-PN-FSPS-V2 digital in-
put module is a safe I/O module for the PROFIsafe protocol.
The module can detect up to 8 binary control signals. Two
sensors can be connected to each connector using a 2-wire,
3-wire or 4-wire connection. In the event that the available
supply current of 0.8 A per plug will not suffice, the sensor
supply must be realised using the auxiliary outputs of an-
other module (e.g. potential distribution module) within the
same power segment.
A status LED is assigned to each channel. The module elec-
tronics supply the connected sensors with power from the
input current path (I
)
IN
A test pulse check of the inputs can be parameterised as a
cross-circuit detection between input singal and supply volt-
age, between different input signals or other signals. Thus an
input gets active only when the signal of the dedicated aux-
iliary output is pending. The test pulses must be disabled if a
safety relay with OSSD outputs generating own test pulses is
connected.
1484600000/04/06.2017
5 Detailed descriptions of safe modules | Digital input module UR20-8DI-PN-FSPS, UR20-8DI-PN-FSPS-V2
DI 0 (PN)
DI 2 (PN)
DI 4 (PN)
DI 6 (PN)
Connection diagram UR20-8DI-PN-FSPS , UR20-8DI-PN-FSPS-V2
A safety sensor that is being connected in a dual chan-
nel mode (safety architecture of category 4 acc. to
DIN EN ISO 13849) must allocate the PN and the P-input of
one connector.
u-remote IP20 modules for functional safety manual
8DI·PN
1
2
AUX-O 0
1
3
AUX-O 1
4
DI 1 (P)
1
2
AUX-O 2
2
3
AUX-O 3
4
DI 3 (P)
1
2
AUX-O 4
3
3
AUX-O 5
4
DI 5 (P)
1
2
AUX-O 6
4
3
AUX-O 7
4
DI 7 (P)
8DI·PN
1
DI 0 (PN)
Safety relay
GND
2
AUX-O 0
with OSSD
1
24 V DC
3
outputs
AUX-O 1
1
4
DI 1 (P)
1
DI 2 (PN)
Safety relay
GND
2
AUX-O 2
with OSSD
2
3
24 V DC
outputs
AUX-O 3
2
4
DI 3 (P)
1
DI 4 (PN)
2
AUX-O 4
3
3
AUX-O 5
4
DI 5 (P)
1
DI 6 (PN)
2
AUX-O 6
4
3
AUX-O 7
4
DI 7 (P)
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents