10 Disassembly And Disposal; 10.1 Disassembling The U-Remote Module; 10.2 Disposing Of The U-Remote Module - Weidmuller UR67 Series Manual

10 Disassembly and disposal

Dangerous contact voltage!
▶ All installation and wiring work must be
carried out with the power supply discon-
nected.
▶ Make sure that the place of installation
has been disconnected from the power
supply!
Hot surface!
The module can become very hot when in
operation.
▶ Allow the module to cool before touching
it.
Risk of glare!
The Ethernet connections of the UR67-PN-
V14-POF modules contain a Class-1 laser.
▶ Never look either directly or indirectly into
the laser beam!
▶ Never aim the laser beam at other
persons!

10.1 Disassembling the u-remote module

▶ Remove all cables and lines.
▶ Unscrew the mounting screws on the module.
▶ Please observe the instructions for proper disposal.
2599890000/01/03.2020
WARNING
CAUTION
CAUTION
10 Disassembly and disposal | Disassembling the u-remote module

10.2 Disposing of the u-remote module

Products in the u-remote series are subject
to WEEE (EU Directive 2012/19 EU), which
regulates the collection and recycling of elec-
trical and electronic equipment.
▶ Make sure that disassembled products are
properly disposed of!
When all u-remote products reach the end of their life cycle,
you can return them to Weidmüller, and we will arrange for
their proper disposal. This also applies to countries outside
the European Union.
▶ Please pack the products properly and send them to your
responsible distributor.
You can find the address of your respective country repre-
sentative on the Weidmüller website.
Manual UR67-PROFINET-V14
ATTENTION
42