Network Connectivity; Introduction - Avaya CallPilot 1005r Hardware Installation

1005r server description
Table 1: 1005r PCI card slot configurations
Configuration
Single MPB96
Three MPB96
(High Capacity)

Network connectivity

Introduction

This section describes how the 1005r server can be integrated into your network. The
integration depends on the type of switch you are using.
16 Avaya CallPilot® 1005r Server Hardware Installation
Card slot Slot
type number
Full size FS_PCI-1
FS_PCI-2
FS_PCI-3
Low profile LP_PCI-1
LP_PCI-2
LP_PCI-3
Note:
When cabling to MGate cards, the RJ-45 connectors are numbered
from 1 to 3 on the NTRH40CA MPB96 board starting from the right
side of the back panel (next to the power supplies).
Full size FS_PCI-1
FS_PCI-2
FS_PCI-3
Note:
3 Mgate cards connect to 1 MPB96
When cabling to MGate cards, the RJ-45 connectors are numbered
from 1 to 3 on the top NTRH40CA MPB96 board and from 4 to 6 on
the middle NTRH40CA MPB96 board starting from the right side of the
back panel (next to the power supplies)
Low profile LP_PCI-1
LP_PCI-2
LP_PCI-3
Position Card type
top MPB96
middle Not used
bottom Not used
top RAID
middle Dual NIC
bottom Dual NIC
top MPB96
middle MPB96
bottom MPB96
top RAID
middle Dual NIC
bottom Dual NIC
Meridian 1*/
Avaya CS* 1000
MGate 1, 2, 3
MGate 1, 2, 3
MGate 4, 5, 6
December 2010