Table of Contents
Advertisement
Chapter 6: EMC emission level protection
To lower the EMC emission level, ferrite cores are installed with one loop (see the following
diagram) on the following external cables:
Ferrite Core (TDK and part number ZCAT3035-1330)—for the triple DS30X I/O cable (Avaya
and part number NTRH2014E6). There are three ferrite cores at each end of the cable.
Caution:
Risk of equipment damage
The ferrite cores are preinstalled on the provided cables. It is not your responsibility to attach
these ferrite cores to these cables. However, you must ensure that these ferrite cores are
in place to keep the EMC emission levels low.
Avaya CallPilot® 1005r Server Hardware Installation
for the 1005r Server
December 2010
49
Advertisement
Table of Contents
