Back Panel Controls And Features - Avaya CallPilot 1005r Hardware Installation

1005r server description

Back panel controls and features

The following diagram shows the back panel controls and features. On the right are the AC
power supply banks. The PCI card brackets are in the middle of the back panel while the
connectors and ports are along the bottom and left side.
Figure 2: Back panel controls and features
Label
A DB15 Telco alarm connector (not
used)
B1 PCI card #3 dual NIC for High
Availability (HA) configuration. For
more information about HA, see
High Availability: Installation and
Configuration (NN44200-311).
B2 PCI card #2 dual NIC for HA
configuration. For more information
about HA, see High Availability:
Installation and Configuration
(NN44200-311).
B3 RAID
C PCI full-size card brackets.
Numbered (1, 2, 3) from top to
bottom.
D Power Supply 1
E Power Supply 2
F PS/2 mouse and keyboard
connectors
12 Avaya CallPilot® 1005r Server Hardware Installation
Control or feature Label Control or feature
G Rear connection to Comm 2 serial
port
H RJ45 NIC 1 connector
I RJ45 NIC 2 connector
J Video connector
K USB 1
L USB 0
M Server management LAN port
N External SCSI tape drive
December 2010