Table of Contents
Advertisement
Connecting the server to power
Locating the power supply modules
Introduction
Both AC power supply modules are installed prior to shipping. The following diagram shows
the location of the power supply modules in the rear panel (D and E):
Figure 9: 1005r rear panel
About the power supply module
After you power up the server (later in this guide), the power supply module LED indicates its
status.
A green LED on each power supply module indicates that the modules are working properly.
If the LEDs are unlit or red, the module is failing or has failed. A problem with a power supply
module is also indicated if the PWR or MJR LED on the front of the server turns red.
Rack power and grounding
To ensure a complete power and grounding installation:
• In rack-mount server installations, ensure the Avaya CallPilot
equipment racks are isolated from other foreign sources of ground. Acceptable isolation
44
Avaya CallPilot® 1005r Server Hardware Installation
®
server chassis and
December 2010
Advertisement
Table of Contents
