BEST ACCESS SYSTEMS W Series Service Manual page 89

Upper escutcheon screw
Lower escutcheon screw
Inside escutcheon
Mounting plate
screw
Inside mounting
plate
Figure 4.33 Reinstalling the mounting plates and escutcheons (M trim, RH door shown)
W Series Service Manual
Task B. To reinstall the mounting plates:
1. For J trim, position the J alignment plate on the outside of the door.
For all other trim, go to step 2.
2. Install the outside and inside mounting plates.
3. Install the two mounting plate screws from the inside of the door.
Mounting plate screw
Outside
mounting plate
Inside of door
Task C. To reinstall the escutcheons (for J trim and M trim only):
1. Position the inside and outside escutcheons on the door.
2. Install the upper and lower escutcheon screws from the inside of
the door.
Note: The J escutcheon has only an upper escutcheon screw.
Service and Maintenance for Mortise Locks
Outside of door
Outside escutcheon
Cylinder ring
Cylinder
4–35