Reinstalling The Levers - BEST ACCESS SYSTEMS W Series Service Manual

Service and Maintenance for Mortise Locks
4–22
For levers
1. With the handle pointing toward the door hinges, insert the outside
lever and spindle assembly into the lock from the outside of the
door.
2. Slide the inside lever onto the inside spindle and secure it with the
set screw.
3. Tighten the upper and lower escutcheon screws.
4. Turn the levers to check that they operate smoothly.
Spindles
Outside of door
Figure 4.23 Reinstalling the levers
Set screw
Inside of door
W Series Service Manual