BEST ACCESS SYSTEMS W Series Service Manual page 117

Caution
W Series Service Manual
Task H. To remove the inside escutcheon:
1. Remove the wire transfer hinge.
2. Pull the wires and splice connectors out of the holes or pockets in
the door and frame.
3. Disconnect the leads.
Access holes
Field wires
Splice
connectors
Door frame
Figure 5.8 Removing the field wire harness
4. Remove the inside escutcheon from the door and pull the field wire
harness out of the door.
When removing the inside escutcheon, make sure that the field wire
harness is not rubbed across any sharp edges or over any surface
that could damage its sleeving or wire insulation.
Service and Maintenance for Cylindrical Locks
Field wire
harness leads
Wire transfer
hinge
Door
5–7