Kia Sorento 2001 General Information Manual page 1265

2001 > 1.8L DOHC >
Removal
1. Discharge refrigeration system. Refer to operatinginstructions of your refrigerant recovery/recycling/
charging station forproper procedures.
2. Remove undercover.
3. Remove compressor as shown in figure, referring to removal note.
Installation
1. Install compressor as shown in figure, referring to installation note.
2. Install undercover.
3. Charge refrigeration system. Refer to operatinginstructions of your refrigerant recovery/recycling/ charging
station forproper procedures.
1) Immediately plug any open fittings to keep moisture out of system.
2) Apply clean compressor oil to O-rings before connecting fittings.
3) Do not apply compressor oil to fitting nuts.
4) Tightening torque :compressor inlet and outlet: 18~23 lb-ft (24~31 N-m, 2.4~3.2 kg-m)
5) Adjust belt tension to specification.