2001 > 1.8L DOHC >
Removal
1. Disconnect negative battery cable.
2. Disconnect wiper motor harness connector.
3. Remove four wiper motor mounting bolts.
4. Separate motor assembly from wiper link assembly using a screwdriver.
5. Remove wiper motor from engine compartment.
Installation
1. Attach wiper motor ball joint to wiper link assembly.
2. Install and tighten four wiper motor mounting bolts.
Tighten mounting bolts to 61~87 lb-in (7~10 N-m, 70~100 kg-cm)
3. Connect wiper motor harness connector.
4. Connect negative battery cable.