Kia Sorento 2001 General Information Manual page 1106

C. Reconnect window operating switch.
D. Connect negative battery cable.
E. Turn on ignition and move glass up and down to ensure proper function.
F. Make adjustments as necessary.
G. Turn off ignition.
H. Disconnect negative battery cable.
I. Tighten two glass mounting bolts on power window regulator assembly.
J. Tighten one bolt on glass guide.
Tightening torque : 60~86 lb-in (7~10 N-m, 70~100 kg-cm)
5. Install plastic door screen.
A. Fasten plastic door screen as originally installed.
B. Pull out electrical harness connector from plastic door screen.
C. Pull out two control rods for inside door handle from plastic door screen.
6. Install speaker with three mounting screws.
7. Install pull handle bracket with two mounting screws.
8. Install door trim. Refer to "Trim" in this section.