Kia Sorento 2001 General Information Manual page 1151

2001 > 1.8L DOHC >
Removal
Headlight/turn signal light assembly
1. Open hood. Disconnect negative battery cable.
2. Remove one screw attaching turn signal light assembly to vehicle.
3. Pull turn signal light assembly forward clear of vehicle.
4. Remove tree bolts attaching headlight assembly to vehicle.
5. Pull turn signal light assembly forward clear of vehicle.
6. Rotate back cover counterclockwise to disengage from light assembly.
7. Pull socket with bulb straight out of headlight and combination light assembly.
Installation
Headlight/turn signal light assembly
1. With bulb installed in socket, align grooves of socket with bosses on headlight and combination light assembly and
insert socket into headlight and combination light assembly.
2. Align back cover with headlight and combination light assembly and install, turning clockwise until properly engaged.
3. Position headlight and combination light assembly on vehicle and install two bolts.
Tightening torque : 61~86 lb-in (7~10 N-m, 70~100 kg-cm)
4. Connect electrical connector to headlight and combination light assembly.
5. Connect negative battery cable.
Replacement
Headlight and position light bulb