Kia Sorento 2001 General Information Manual page 1037

In-line connectors
1. The following illustrations show typical electrical connectors and their disengagements.
A. Insert a flat blade screwdriver in the locking tab and twist.
B. Grasp the connector housing and pull until the locking tab is on the ramp.
Turn the connector over and repeat the procedure on the opposite side of the connector.
Grasp the connector housing and pull apart.
Disconnecting the connector
1. The connector can be disconnected by pressing the lock lever. Do not pull on the wires when disconnecting the
connector.Be careful to hold the connector itself when disconnecting it.