Kia Sorento 2001 General Information Manual page 1126

2. Pivot blade until locking tab is exposed and then press in.
3. Push wiper blade down arm until hook has separated from blade.
4. Slide blade up arm until it clears hook.
Removal
Link assembly
1. Remove wiper arms and blades. Refer to "Windshield Wiper/Washer System" in this section.
2. Remove eight clips and four fasteners from cowl grille.
3. Remove cowl grille.
4. Remove wiper motor. Refer to "Windshield Wiper/Washer System" in this section.
5. Remove four nuts from pivot shafts.
6. Slide link assembly out of driver's side access hole.
Installation
Washer hose
Reverse removal procedures.
Installation
Washer nozzle
1. Connect nozzle to neoprene hose
2. Face nozzle exit towards windshield and push in place on hood.
Installation
Windshield wiper blade