Kia Sorento 2001 General Information Manual page 1165

2001 > 1.8L DOHC >
Removal
1. Disconnect negative battery cable.
2. Remove three screws attaching rear combination light assembly to vehicle.
3. Disconnect electrical connector.
4. From outside of vehicle, grasp combination light assembly push combination light assembly outside and
combination light assembly and pull from vehicle using care not to damage gasket.
Installation
1. Install gasket on light assembly with pins through appropriate holes of gasket.
2. Position light assembly on vehicle with studs through mounting holes on vehicle.
3. Install three screws on rear combination light.
4. Connect electrical connector.
5. Connect negative battery cable.
Replacement
Rear combination light assembly bulb
1. Disconnect negative battery cable.
2. Disconnect electrical connector from light assembly.
3. From outside of vehicle, grasp combination light assembly, push combination light assembly outside and
pull from vehicle using care not to damage gasket and combination light assembly.
4. With bulb holder disengaged, pull bulb holder carefully forward relative to vehicle, and remove from light
assembly.