Kia Sorento 2001 General Information Manual page 1152

1. Disconnect negative battery cable.
2. Remova electrical connector from headlight and combination lightassembly.
3. Remove back cover by pushing in on cover, then rotating cover counterclockwiseto disengage from headlight and
combination light assembly.
The headlight bulb is filled with a gas which is under pressure. Damageto glass part of bulb can cause bulb to
explode causing possible personalinjury.
Use care when handling halogen headlight bulb. Do not touch glass part of bulb with bare hands. Oil from skin
can cause bulb to fail.
4. Pull socket with bulb straight back and remove it from headlight andcombination light assembly.
5. If bulb has failed, place it in new bulb carton and dispose of properly.
6. Hold replacement bulb by base, or use clean cloth or paper to avoidtouching glass, and install bulb in socket.
7. Align slots on bulb and corresponding bosses on headlight assembly.Insert bulb into headlight and combination
assembly.
8. Install back cover to hold bulb in place.
9. Connect electrical connector.
10. Connect negative battery cable.
High-mounted brake light assembly bulb
1. Disconnect negative battery cable.
2. Remove cover.