Kia Sorento 2001 General Information Manual page 1074

2001 > 1.8L DOHC >
Removal
Bezel/Lens
1) Do not touch face of a gauge or back of lens with fingers. It will leave a permanent fingerprint.
2) Use care in removing instruments from instrument cluster case. Make sure instruments are face-up when
separating bezel/lens from cluster case.
1. With instrument cluster bezel/lens downward on a soft, clean shop cloth, press on each of bezel tabs going out around
unit while using pressure between bezel/lens and cluster.
Do not remove bezel/lens. Make sure each tab is not in a locked position in its mating slot.
2. Place instrument cluster case on its back, bezel/ lens facing up, and carefully pull bezel/lens away from cluster case.
REMOVAL
INSTRUMENT CLUSTER
1. Remove one mounting screw.
2. Remove instrument cluster hood.
3. Remove four mounting screws.
4. Pull cluster from instrument panel.
5. Disconnect three connectors.
6. Remove instrument cluster.