Kia Sorento 2001 General Information Manual page 1247

Check voltage at blower motor.
1. Turn ignition switch ON.
2. Turn blower switch to OFF.
3. Measure voltage at following pin of blower motor connector G-07.
Pin
B
(R)
Check voltage at blower motor resistor assembly
1. Turn ignition switch ON.
2. Turn blower switch OFF and verify that A/C switch is OFF.
3. Measure voltage at following pins of resistor assembly connector G-06.
Pin
B
(R/L)
A
(R/G)
C
(G)
D
(BR)
Check voltage at blower switch
1. Turn ignition switch ON.
2. Turn blower switch to OFF.
3. Measure voltage at following pins of blower switch connector G-03.
Voltage
Voltage
12V Proceed to pin A (R/G)
0V Repair R/L wire
12V Proceed to pin C (G)
0V Replace resister assembly
12V Proceed to pin D (BR)
0V Replace resistor assembly
12V Go to Step 4
0V Replace resistor assembly
12V Go to step 3
Repair or replace blower motor
0V and wiring harness.
(fuse box-blower motor)
Action
Action