Table of Contents
Advertisement
FUEL INJECTION (FUEL SYSTEMS)
23) Disconnect the fuel delivery hose, return hose
and evaporation hose.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
24) Remove the bolts which hold intake manifold
onto cylinder heads.
25) Remove the intake manifold.
B: INSTALLATION
1) Install the intake manifold onto cylinder heads.
NOTE:
Use a new gasket.
Tightening torque:
⋅
25 N
m (2.5 kgf-m, 18.4 ft-lb)
Intake Manifold
2) Connect the fuel delivery hose, return hose and
evaporation hose.
NOTE:
If fuel hoses or clamps are damaged, replace them
with new ones.
FU-01168
3) Tighten the hose clamp screws.
Tightening torque:
1.5 N
4) Connect the connectors to the exhaust camshaft
position sensor (A) and exhaust oil flow control so-
lenoid valve (B).
FU-01169
5) Connect the connector to intake oil flow control
solenoid valve.
FU-01169
FU(H4DOTC)-14
⋅
m (0.15 kgf-m, 1.1 ft-lb)
(B)
FU-01168
(A)
FU-01167
FU-01166
Advertisement
Chapters
Table of Contents
