Subaru Legacy 2005 Service Manual page 1013

11.Fuel Injector
A: REMOVAL
1. RH SIDE
1) Release the fuel pressure.
<Ref. to FU(H4DOTC)-39, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
2) Open the fuel filler flap lid, and remove the fuel
filler cap.
3) Remove the collector cover.
4) Disconnect the ground cable from battery.
5) Remove the coolant filler tank. <Ref. to
CO(H4DOTC)-31, REMOVAL,
Tank.>
6) Disconnect the connector from fuel injector.
7) Remove the screw and remove the fuel injector.
2. LH SIDE
1) Release the fuel pressure.
<Ref. to FU(H4DOTC)-39, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
2) Open the fuel filler flap lid, and remove the fuel
filler cap.
3) Remove the collector cover.
Fuel Injector
4) Disconnect the ground cable from battery.
5) Disconnect the connector from fuel injector.
6) Remove the screw and remove the fuel injector.
IN-00203
Coolant Filler
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
NOTE:
Use a new O-ring.
Tightening torque:
2. LH SIDE
Install in the reverse order of removal.
NOTE:
FU-01189
Use a new O-ring.
Tightening torque:
FU(H4DOTC)-29
FUEL INJECTION (FUEL SYSTEMS)
⋅
3.5 N m (0.36 kgf-m, 2.6 ft-lb)
⋅
3.5 N m (0.36 kgf-m, 2.6 ft-lb)
IN-00203
FU-01190