Table of Contents
Advertisement
2) Correctly insert the fuel filler hose (A) and vent
hose (B) to specified position, and then tighten the
clamp.
(A)
( 1 )
(1) Hose
(2) Clip or clamp
(3) Pipe
3) Install the two-way valve to bracket, and connect
the two-way valve hose (A) to two-way valve.
(A)
4) Tighten the bolts of fuel tank band.
Tightening torque:
⋅
33 N
m (3.4 kgf-m, 24.3 ft-lb)
5) Install the rear suspension assembly.
CAUTION:
A helper is required to perform this work.
(1) Support the rear differential with transmis-
sion jack.
Fuel Tank
(B)
FU-01136
( 2 )
( 3 )
L/2
L
FU-00104
FU-01135
FU(H4SO 2.5)-45
FUEL INJECTION (FUEL SYSTEMS)
(2) Support the rear suspension assembly, and
then tighten the bolts which secure the rear sus-
pension assembly to body.
Tightening torque:
⋅
T1: 125 N
m (12.7 kgf-m, 92.2 ft-lb)
⋅
T2: 65 N
m (6.2 kgf-m, 48 ft-lb)
⋅
T3: 175 N
m (17.8 kgf-m, 129 ft-lb)
T1
T1
T3
T2
(3) Tighten the bolts which install the rear shock
absorber to rear suspension arm. <Ref. to RS-
11, INSTALLATION, Rear Arm.>
Tightening torque:
⋅
62 N
m (6.3 kgf-m, 46 ft-lb)
T1
T1
FU-01150
T3
T2
FU-01138
FU-01132
Advertisement
Chapters
Table of Contents
