Table of Contents
Advertisement
MECHANICAL
16.Timing Belt
A: REMOVAL
1. TIMING BELT
1) Remove the V-belts. <Ref. to ME(H4DOTC)-40,
REMOVAL, V-belt.>
2) Remove
the
crank
ME(H4DOTC)-43, REMOVAL, Crank Pulley.>
3) Remove the timing belt cover.
<Ref. to ME(H4DOTC)-45, REMOVAL, Timing Belt
Cover.>
4) Remove the timing belt guide. (Model with timing
belt guide)
Timing Belt
pulley.
<Ref.
to
ME-00065
ME-00727
ME-00728
ME(H4DOTC)-46
5) If the alignment mark or arrow mark (which indi-
cates rotation direction) on timing belt fade away,
put new marks before removing the timing belt as
shown in procedures below.
(1) Turn the crankshaft using ST, and align the
alignment marks on crank sprocket, intake cam
sprocket (LH), exhaust cam sprocket (LH), in-
take cam sprocket (RH) and exhaust cam
sprocket (RH) with notches of timing belt cover
and cylinder block.
ST 499987500
CRANKSHAFT SOCKET
ST
ME-00729
ME-00069
Advertisement
Chapters
Table of Contents
