Subaru Legacy 2005 Service Manual page 996

FUEL INJECTION (FUEL SYSTEMS)
3. Intake Manifold
A: REMOVAL
1) Release the fuel pressure.
<Ref. to FU(H4DOTC)-39, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
2) Open the fuel filler flap lid, and remove the fuel
filler cap.
3) Remove the collector cover.
4) Disconnect the ground cable from battery.
5) Lift-up the vehicle.
6) Remove the under cover.
7) Drain coolant about 3.0 2 (3.2 US qt, 2.6 Imp
qt).
8) Remove the intake duct from air cleaner case.
9) Remove the intercooler. <Ref. to IN(H4DOTC)-
12, REMOVAL, Intercooler.>
10) Remove the generator. <Ref. to SC(H4SO
2.0)-14, REMOVAL, Generator.>
11) Remove the coolant filler tank. <Ref. to
CO(H4DOTC)-31, REMOVAL,
Tank.>
12) Disconnect the PCV hose assembly from cylin-
der block.
Intake Manifold
13) Disconnect the engine coolant hose from throt-
tle body.
14) Disconnect the brake booster hose.
IN-00203
15) Disconnect the engine harness connectors
from bulkhead harness connectors.
Coolant Filler
FU-01160
FU(H4DOTC)-12
FU-01158
FU-01161
FU-01162
FU-01163