6) Install the hood stay holder (B).
7) Install
the
reservoir
CO(H4DOTC)-30,
INSTALLATION,
Tank.>
8) Connect the over flow hose.
9) Install the air intake duct.
<Ref. to IN(H4DOTC)-9, INSTALLATION, Air In-
take Duct.>
10) Lift-up the vehicle.
11) Connect the ATF cooler hoses. (Model without
ATF warmer)
12) Connect the radiator outlet hose.
Radiator
(A)
(B)
CO-00255
tank.
<Ref.
Reservoir
CO-00253
CO-00249
CO(H4DOTC)-21
13) Connect the connectors to radiator main fan
motor (A) and sub fan motor (B).
to
14) Install the heat shield cover. (Model without
ATF warmer)
15) Install the under cover.
16) Lower the vehicle.
17) Connect the ground cable to battery.
18) Fill engine coolant.
<Ref. to CO(H4DOTC)-13, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
19) Check the ATF level. <Ref. to 5AT-28, IN-
SPECTION, Automatic Transmission Fluid.>
COOLING
(A)
CO-00251
(B)
CO-00252
CO-00250
IN-00203