Subaru Legacy 2005 Service Manual page 1064

INTAKE (INDUCTION)
8. Turbocharger
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from battery.
4) Remove the intercooler. <Ref. to IN(H4DOTC)-
12, REMOVAL, Intercooler.>
5) Remove the intercooler bracket RH.
6) Remove the linear motion mounting.
<Ref. to ME(H4DOTC)-38, REMOVAL, Linear Mo-
tion Mounting.>
7) Remove the linear motion mounting bracket.
(A)
(B)
(A) Linear motion mounting bracket
(B) Turbocharger bracket
8) Remove the center exhaust pipe.
<Ref. to EX(H4DOTC)-6, REMOVAL, Center Ex-
haust Pipe.>
9) Lower the vehicle.
10) Disconnect the engine coolant hose which is
connected to coolant filler tank.
Turbocharger
11) Separate the turbocharger joint pipe from tur-
bocharger.
12) Remove the bolts which secure oil pipe bracket
to turbocharger.
13) Remove the oil inlet pipe from turbocharger.
IN-00203
14) Remove the bolts which secure turbocharger to
bracket.
IN-00251
15) Disconnect the hoses from the oil outlet pipe
(A) and coolant pipe (B) located under the turbo-
charger.
16) Take out the turbocharger from engine com-
IN-00226
partment.
IN(H4DOTC)-14
(B)
IN-00227
IN-00228
IN-00229
(A)
IN-00230