Subaru Legacy 2005 Service Manual page 1176

EXHAUST
4. Joint Pipe
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the front exhaust pipe cover.
6) Remove the nuts which hold front exhaust man-
ifold to turbocharger joint pipe.
7) Remove the center exhaust pipe. <Ref. to
EX(H4DOTC)-6, REMOVAL,
Pipe.>
8) Remove the turbocharger.
IN(H4DOTC)-14, REMOVAL, Turbocharger.>
9) Remove the joint pipe from the lower side of ve-
hicle.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
T: 35 N m (3.6 kgf-m, 26.0 ft-lb)
T
Joint Pipe
IN-00203
EX-00201
Center Exhaust
<Ref. to
T
EX-02019
EX(H4DOTC)-10
C: INSPECTION
1) Check the connections and welds for exhaust
leaks.
2) Check for hole or rust.