Subaru Legacy 2005 Service Manual page 1147

45) Install the crank pulley.
<Ref. to ME(H4DOTC)-43, INSTALLATION, Crank
Pulley.>
46) Install the generator and A/C compressor
brackets on cylinder head.
C: DISASSEMBLY
(1) Connecting rod cap
(2) Connecting rod bearing
1) Remove the connecting rod cap.
2) Remove the connecting rod bearing.
NOTE:
Arrange the removed connecting rod, connecting
rod cap and bearing in order, to prevent confusion.
3) Remove the piston rings using piston ring ex-
pander.
4) Remove the oil ring by hand.
NOTE:
Arrange the removed piston rings in proper order,
to prevent confusion.
5) Remove the snap ring.
Cylinder Block
(1)
(2)
(3) Top ring
(4) Second ring
ME(H4DOTC)-81
47) Install the V-belts. <Ref. to ME(H4DOTC)-40,
INSTALLATION, V-belt.>
48) Install the intake manifold.
<Ref. to FU(H4DOTC)-14, INSTALLATION, Intake
Manifold.>
(2)
(6)
(5) Oil ring
(6) Snap ring
MECHANICAL
(5)
(4)
(3)
ME-00168