Subaru Legacy 2005 Service Manual page 1007

5. Crankshaft Position Sensor
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the bolt which installs crankshaft posi-
tion sensor to cylinder block.
4) Remove the crankshaft position sensor, and dis-
connect the connector from it.
Crankshaft Position Sensor
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
IN-00203
FU-00056
FU-00057
FU(H4DOTC)-23
FUEL INJECTION (FUEL SYSTEMS)
⋅
T: 6.4 N m (0.65 kgf-m, 4.7 ft-lb)
T
FU-00058