Table of Contents
Advertisement
LUBRICATION
4. Oil Pump
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the radiator. <Ref. to CO(H4DOTC)-19,
REMOVAL, Radiator.>
6) Remove the crankshaft position sensor.
7) Remove the V-belts. <Ref. to ME(H4DOTC)-40,
REMOVAL, V-belt.>
8) Remove the rear side V-belt tensioner.
Oil Pump
9) Remove the crank pulley using ST. <Ref. to
ME(H4DOTC)-43, REMOVAL, Crank Pulley.>
10) Remove
CO(H4DOTC)-15, REMOVAL, Water Pump.>
IN-00203
11) Remove the timing belt guide.
12) Remove the crank sprocket.
LU-00046
13) Remove the bolt which installs oil pump to cyl-
inder block.
LU-00011
LU(H4DOTC)-10
the
water
pump.
LU-00012
<Ref.
to
LU-00013
LU-00014
LU-00015
Advertisement
Chapters
Table of Contents
