Subaru Legacy 2005 Service Manual page 281

(6) Tighten the bolts (o) through (v) in alphabet-
ical sequence.
Tightening torque:
⋅
10 N m (1.0 kgf-m, 7.4 ft-lb)
( o )
( u )
( v )
( r )
(7) Tighten the bolts (w) and (x) in alphabetical
sequence.
Tightening torque:
⋅
10 N m (1.0 kgf-m, 7.4 ft-lb)
(w)
( x )
3) Apply a coat of engine oil to oil seal lips and in-
stall the oil seal (A) on camshaft using ST1 and
ST2.
NOTE:
Use a new oil seal.
ST1 499597000 OIL SEAL GUIDE
ST2 499587500 OIL SEAL INSTALLER
4) Install the plug using ST.
ST 499587700 CAMSHAFT OIL SEAL IN-
STALLER
5) Adjust the valve clearance. <Ref. to ME(H4SO
2.0)-29, ADJUSTMENT, Valve Clearance.>
( q )
( s )
( t )
( p )
ME-00270
ME-00271
ST1
ST2
(A)
ME-02596
ME(H4SO 2.0)-55
Camshaft
6) Install the rocker cover and rocker cover gasket,
and then connect the PCV hose.
NOTE:
Use a new rocker cover gasket.
7) Install the oil level gauge guide. (LH side only)
8) Install the camshaft position sensor support. (LH
side only)
9) Install the tensioner bracket.
Tightening torque:
⋅
24.5 N m (2.5 kgf-m, 18.1 ft-lb)
10) Install the timing belt cover No. 2 (RH).
Tightening torque:
⋅
5 N m (0.5 kgf-m, 3.7 ft-lb)
11) Install the timing belt cover No. 2 (LH).
Tightening torque:
⋅
5 N m (0.5 kgf-m, 3.7 ft-lb)
12) Install the crank sprocket.
<Ref. to ME(H4SO 2.0)-50, INSTALLATION,
Crank Sprocket.>
13) Install the cam sprocket. <Ref. to ME(H4SO
2.0)-48, INSTALLATION, Cam Sprocket.>
14) Install the timing belt. <Ref. to ME(H4SO 2.0)-
44, INSTALLATION, Timing Belt.>
15) Install the timing belt cover.
<Ref. to ME(H4SO 2.0)-42, INSTALLATION, Tim-
ing Belt Cover.>
16) Install the crank pulley. <Ref. to ME(H4SO
2.0)-40, INSTALLATION, Crank Pulley.>
17) Install the V-belts. <Ref. to ME(H4SO 2.0)-37,
INSTALLATION, V-belt.>
MECHANICAL
ME-00273
ME-00274