Subaru Legacy 2005 Service Manual page 271

2) Install the automatic belt tension adjuster as-
sembly.
Tightening torque:
⋅
39 N m (4.0 kgf-m, 28.9 ft-lb)
3) Install the belt idler (No. 1).
Tightening torque:
⋅
39 N m (4.0 kgf-m, 28.9 ft-lb)
2. TIMING BELT
1) Prepare for installation of automatic belt tension
adjuster assembly. <Ref. to ME(H4SO 2.0)-44, AU-
TOMATIC BELT TENSION ADJUSTER ASSEM-
BLY AND BELT IDLER, INSTALLATION, Timing
Belt.>
2) Install the timing belt.
(1) Turn the cam sprocket No. 2 using ST1, and
turn the cam sprocket No. 1 using ST2 so that
their alignment marks (A) come to top positions.
ST1 18231AA010 CAM SPROCKET WRENCH
NOTE:
CAM SPROCKET WRENCH (499207100) can
also be used.
Timing Belt
ST2 499207400
(2) While aligning alignment marks (B) on the
timing belt with marks (A) on sprockets, position
the timing belt properly.
ME-00241
3) Install the belt idler No. 2.
Tightening torque:
39 N
ME-02404
4) Install the belt idler (No. 2).
Tightening torque:
39 N
ME(H4SO 2.0)-45
CAM SPROCKET WRENCH
(A)
⋅
m (4.0 kgf-m, 28.9 ft-lb)
⋅
m (4.0 kgf-m, 28.9 ft-lb)
MECHANICAL
ME-00243
ME-00244
ME-00235