Subaru Impreza 2003 Service Manual page 68

PRE-DELIVERY INSPECTION
2) Close the driver's door completely, and place the
door lock knob (A) to the lock position. Then pull in-
ner remotes (B) to ensure that doors will not open.
For other doors, place the door lock knob (A) to the
lock positions and then pull the inner remote to en-
sure that the doors will not open.
(B)
(A) Door lock knob
(B) Inner remote
3) Press the driver's side power door lock switch to
lock side. Check that all doors including rear gate
are locked.
4) Press the driver's side power door lock switch to
unlock side. Check that all doors including rear
gate are unlocked.
PRE-DELIVERY INSPECTION
(A)
PI-00004
PI-00142
PI-00143
PI-6
6. CHECK DOUBLE LOCK OPERATION
1) Fully open all the windows.
2) Remove the key.
3) Lock all the doors using the door key cylinder or
transmitter.
4) Verify that all the doors including rear gate are
not unlocked when pressing power door lock switch
to unlock side.
5) Verify that the door is not opened when operat-
ing door lock knob to unlock position and pulling in-
ner remote. Perform the same check for other
doors.
6) Check that all the doors are unlocked when door
is unlocked using door key cylinder or transmitter,
or ignition switch is turned to ON.
7. CHECK THE OPERATION OF CHILD
SAFETY LOCKS
1) Set the child safety lock on both rear doors to the
lock positions.
2) Close the rear doors completely.
3) Check that the lock levers of the rear doors are in
the unlock positions. Then, pull the inner remotes
of the rear doors to ensure that the doors will not
open.
4) Next, pull the outside door handles of the rear
doors to ensure that the doors will open.
(C)
(A)
(B)
(A) Unlock
(B) Lock
(C) Child safety lock
PI-00084