Subaru Impreza 2003 Service Manual page 194

FUEL DELIVERY, RETURN AND EVAPORATION LINES
FUEL INJECTION (FUEL SYSTEMS)
9) Separate the quick connector on fuel delivery
line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) Hold the connector (A), and then push the
retainer (B) down.
(3) Pull out the connector (A) from retainer (B).
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery
line.
NOTE:
• Replace the retainer with a new one.
• Make sure that the connected portion is not dam-
aged or has dust. If necessary, clean the seal sur-
face of pipe.
( B )
( C )
FU-00124
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
FU(H4SO)-66
( A )
(A) Seal surface
(B) Pipe
( A )
( B )
(A) Connector
(B) Retainer
(C) Pipe
( B )
FU-00125
( C )
FU-00126